Training Locations

Training Location

Nambour Regional Training Centre

Corner of Nambour North Connection Rd and Ferntree Creek Rd, Kulangoor Queensland. The exact address for your GPS is 9 Ayreshire Rd, Kulangoor 4560.

1.5 kilimetres south of Yandina and 5 kilometres north of Nambour on the Nambour North Connection Road. (This is the old Bruce Highway before the motorway was built.)

The training centre was previously known as the Big Cow. This huge concrete cow can still be viewed on the site. Back in the 70’s it was a busy tourist attraction similar to the Big Banana, the Big Pineapple and all the other “Big” things which were popular then.

For navigation guidance phone Eric Robb on 0424 277 728.

Arriving by air:

From Melbourne or Sydney you can fly directly into Maroochy airport (sometimes referred to as Sunshine Coast Airport or Maroochydore Airport)and catch a taxi or a bus to Nambour from there.

Arriving by car:

From the South, follow the Bruce Highway north past the Nambour/Mudjimba exit and take the next exit which is called Parklands. At the T intersection turn right (north) and proceed about 2 kilometres, go over the railway bridge overpass then take the next next left and you are there.

From the North, follow the Bruce Highway south and take the Yandina/Coolum exit. go around the roundabout and head towards Yandina (west). Go under the railway bridge and keep going to the set of traffic lights. Turn left (south) at the lights onto Nambour North Connection Road and proceed about 1.5 kilometres. Turn right at the intersection of Ferntree Creek Rd and you have arrived.

Here is a link to a Google Map :

https://www.google.com.au/maps/place/Kulangoor+QLD+4560/@-26.5886301,152.9506478,15.49z/data=!4m2!3m1!1s0x6b937978eab992af:0x502a35af3deaaf0